- Overview
- Detailed Photos
- Packaging & Shipping
- Company Profile
Basic Info.
Model NO.
Rockfall Netting
Mesh Width
Inscribed Circle Diameter of Mesh 65 mm
Wire Diameter
2.0mm, 3.0mm, 4.0mm, 4.6mm
Tensile Strength
1770MPa
Roll Width
3.5m Construction
Roll Length
10m 20m 30m Construction
Compound
95% Zn / 5% Ai
Coating
Min. 150g /M2
Mesh Edges
Mesh Ends Knotted
Transport Package
Customer′ S Requirement Acceptable
Specification
10m, 20m, 30m, as per site requirement
Trademark
LONGEN
Origin
China
HS Code
73144100
Production Capacity
50000
Product Description
TECCO mesh, featuring 2 mm, 3 mm or 4 mm wire made from high-tensile steel, can be used to stabilize virtually any kind of slope, whether it consists of rock or loose soil. Coupled with either of three different sized spike plates, the TECCO offers an attractive nail grid and, therefore, maximum efficiency during installation.
TECCO Mesh System:
Main Components
The TECCO system consists of four main components that are carefully coordinated with the others:
TECCO mesh is made of the high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.
1.Wire diameter : 3.0 mm
2.high tensile strength 1770Mpa
3.Diagonal : 83 · 143mm (+/-3%)
4.Mesh shape:diamond
5.Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
TECCO Spike Plates
Rigid spike plates reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the TECCO mesh.
These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.
The plates are galvanized and have dimensions of 13.0''*7.5"*0.3"/0.4"(330mm*190mm*8/10mm), 13.0''*7.08"*0.3"/0.4"(330mm*180mm*8/10mm), 13.0''*7.5"*0.3"/0.4"(330mm*205mm*8/10mm), etc. 
Soil or Rock Nails (Steel Anchor)
The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m) horizontal and vertical spacing. Anchor consists of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Self-drilling grout injection anchors are also permitted. Additional anchors may also be used to provide added support at boundaries and in low points and hollows. 
TECCO Connection Clips T2 / T3
The high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These clips are hot-dip galvanized and consist of 0.16" (4mm) or 0.25"(6mm) thick steel spirals. 
TECCO Mesh System:
Main Components
The TECCO system consists of four main components that are carefully coordinated with the others:
1.Wire diameter : 3.0 mm
2.high tensile strength 1770Mpa
3.Diagonal : 83 · 143mm (+/-3%)
4.Mesh shape:diamond
5.Material:high tensile steel wire
6. Corrosion protection:super coating
7. Coating:150g/m2
8. Breaking load of single wire:12.5KN
9. Tensile strength:110KN/m
Mesh edges knotted
Roll width:2.3m-3.5m
Roll length:110m-30m
Rigid spike plates reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the TECCO mesh.
These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.
The plates are galvanized and have dimensions of 13.0''*7.5"*0.3"/0.4"(330mm*190mm*8/10mm), 13.0''*7.08"*0.3"/0.4"(330mm*180mm*8/10mm), 13.0''*7.5"*0.3"/0.4"(330mm*205mm*8/10mm), etc.
The main anchors of the system are installed in a grid typically from 6.6 to 13.1 ft (2.0 to 4.0m) horizontal and vertical spacing. Anchor consists of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Self-drilling grout injection anchors are also permitted. Additional anchors may also be used to provide added support at boundaries and in low points and hollows.
The high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These clips are hot-dip galvanized and consist of 0.16" (4mm) or 0.25"(6mm) thick steel spirals.
